SSTM(Q)2 Commutating Control Cabinet is designed to control two separators mounted over the same belt and work alternatively by one electric control unit. When a set time to one excitation separator is up, it will stop working, while the other will move in and take the place of ex-one to attract iron pieces, working alternatively with the advantages of auto iron-discharging, good removing rate, etc., especially suitable for the demand of continuous working. However if you need them to work simultaneously except for alternatively, or over a different belt, please let us know when placing an order.
Operation Mode &Voltage Characteristic Sketch
Overall Dimension Drawing
Main Technical Data
Note: 1. The rated voltage for separator shall be matched with the output voltage of the electric control cabinet. The total power consumption of two separators in cold state shall be less than or equal to the rated output power of electric control cabinet.
2. If you need a time adjustment range more than 1 hour, please let us know when placing an order.
3. The overall dimension of cabinet is usually for general type. If you have some special requirement, please contact with us.